Adler DWA2050 Undercounter Dishwasher & Glasswasher
Premium Italian Engineering for High-Volume Australian Hospitality Venues
The Adler DWA2050 Undercounter Dishwasher (Manufacture Code: ECO50) is a heavy-duty, Italian-manufactured commercial undercounter dishwasher and glasswasher engineered to withstand the relentless demands of busy Australian cafes, restaurants, clubs, and taverns. Purpose-built to slide effortlessly under standard kitchen benches and low-bar frameworks, this professional wash system ensures your plates, cups, cutlery, and high-volume glassware emerge thermally sanitised, pristine, and completely streak-free.
Operating on a single-phase 240V 15AMP electrical connection, the Adler DWA2050 maximizes back-of-house efficiency without forcing business owners into costly three-phase electrical modifications. Constructed entirely from premium commercial stainless steel, it features an integrated factory-fitted drain pump, dynamic automatic chemical dosing pumps, and a standard 500mm x 500mm basket capacity, delivering industrial-grade washing power right where space is at a premium.
Why the Adler DWA2050 is Essential for Commercial Kitchens & Bars
A bottleneck at the dishwashing station can completely derail a busy service shift. The Adler DWA2050 eliminates processing delays by seamlessly blending structural reliability with exceptionally fast turnarounds.
- Massive Load Versatility: Equipped with a generous 340mm internal clearance, allowing it to wash large dinner plates, platters, and tall beer pitchers alongside delicate wine stems.
- High-Throughput Performance: Easily cleans and sanitises large volumes of tableware by completing rapid cycles on demand.
- Industrial Wash Action: A robust 0.75 HP wash pump powers upper and lower stainless steel wash arms to strip away baked-on food, greases, and residues instantly.
- Eco-Conscious Infrastructure: Advanced double-insulated door design limits heat radiation, dropping energy consumption while keeping your commercial kitchen or front-of-house bar running quietly.
Key Performance Features & Operational Advantages
Dual Selectable Fast Wash Cycles
Switch effortlessly between a lightning-fast 1-minute wash cycle and an intensive 3-minute program. The 60-second cycle is ideal for recovering glasses and light plates during hectic lunch rushes, while the 180-second cycle steps up to dissolve heavy fats and dried sauces on dinnerware.
Integrated Chemical Dosing Pumps
Remove manual chemical pouring entirely from your staff’s workflow. The Adler DWA2050 features factory-integrated automatic rinse aid and detergent pumps, safely drawing the precise millilitres needed per run to achieve a flawless finish while reducing recurring operating overheads.
Factory-Fitted Drain Pump
Unlike traditional gravity-drain commercial washers that force you to position the machine directly above a floor waste drain, the Adler DWA2050 comes standard with an internal drain pump. This gives you total flexibility to pump wastewater upward into an elevated sink spigot or wall drain line without pooling hazards.
Premium Double Insulated Door
The precision-crafted, counter-balanced door structure relies on comprehensive thermal insulation. It aggressively retains internal boiler heat to save power while absorbing mechanical vibrations, ensuring a remarkably quiet workspace.
Real-Time Digital Temperature Displays
Stay fully aligned with local food health safety regulations. The intuitive, front-facing digital temperature display panel communicates exact wash tank and rinse boiler temperatures in real-time, letting supervisors verify thermal sanitisation marks effortlessly.
Technical Specifications
Dimensions, Power & Capacity
- Dimensions: W 575mm x D 600mm x H 805mm
- Basket Size: 500mm x 500mm (2 heavy-duty commercial racks supplied)
- Internal Clearance Height: 340mm vertical clearance (Fits large plates and oversized stemware)
- Tank Capacity: 17 Litres – Equipped with an efficient 2.8kW heating element
- Boiler Capacity: 7 Litres – Backed by a high-recovery 2.8kW heating element
- Wash Pump Motor: Ultra-powerful 0.75 HP pump
- Electrical Connection: 240V / 50Hz / 1 Phase with a standard 15AMP plug attached
- Total Power Consumption: 3.4kW
- Net Weight: 60kg
- Country of Origin: 100% Designed and Manufactured in Italy
Water Consumption & Requirements
- Water Usage: Ultra-efficient ~1.7 Litres per cycle
- Required Inlet Water Pressure: 2 to 4 Bar
- Plumbing Connection: Must be hard plumbed directly into an active hot water supply line.
- Included Accessories: Reinforced stainless steel inlet hose, premium Califf pressure control valve, and non-return safety valve.
Critical Installation Requirements
To achieve rated wash results and safeguard your commercial manufacturer warranty, the Adler DWA2050 requires adherence to these baseline site specifications during setup:
- Dedicated Hot Water Supply: This machine must be connected to a hot water line. Feeding cold water into the unit will severely extend thermal recovery periods, lag cycle times and dropping hygiene performance.
- Pressure Regulation: Inlet water pressures must sit steadily between 2 and 4 bar. The included Califf pressure control valve and non-return valve must be fitted directly to the incoming line to maintain structural safety and comply with Australian water plumbing regulations.
- Inlet Security: Only utilize the commercial-grade stainless steel inlet hose shipped inside the unit box to manage high temperature and thermal expansion under pressure.
- Electrical Proximity: A dedicated 240V 15AMP single-phase socket must be positioned safely within range of the power cord, away from splash or puddle zones.
- Drain Management: The integrated drain pump enables flexible waste routing, but discharge lines must be properly clamped to an open standpipe or a certified under-sink spigot to prevent wastewater back-siphoning.
Cleaning & Maintenance Best Practices
Keep your Italian engineering running optimally through simple daily preventative care:
- Daily Scrap Clearance: At the close of each business day, drain the wash tank completely, lift out the internal stainless steel scrap filters, and rinse off solid debris under hot running tap water.
- Clear Spray Nozzles: Periodically unlatch the upper and lower stainless-steel wash and rinse arms. Inspect the precision nozzles for mineral scales or seed blockages, clearing them with a pin.
- Preserve Door Seals: Wipe down the perimeter rubber door gaskets with a soft damp cloth to clear chemical film buildup and preserve a tight, steam-proof seal.
- Monthly Descaling: Depending on your local Australian water hardness, execute a dedicated commercial descaling routine monthly to dissolve scale formations on the internal element shielding.
Warranty & Compliance
The Adler DWA2050 is built in full compliance with rigorous Australian electrical, plumbing, and strict health department sanitation codes. Every unit comes standard with premium national commercial coverage:
- Extended Gold Star Warranty: 2 Years Parts Protection & 1 Year On-Site Labour Support.
Frequently Asked Questions (FAQs)
Q: What size plates and glasses can fit inside the Adler DWA2050?
A: Thanks to its generous 340mm internal clearance height, the machine easily handles large restaurant dinner plates, wide platters, tall wine stems, craft beer schooners, and high-sided blending jugs.
Q: Can I plug this commercial dishwasher into a standard 10AMP wall socket?
A: No. The Adler DWA2050 draws a total of 3.4kW and requires a dedicated single-phase 240V 15AMP electrical socket to accommodate its high-recovery heating elements safely.
Q: How many wash baskets are included with this unit?
A: This model ships complete with two heavy-duty 500mm x 500mm commercial racks, allowing your kitchen team to prep and load one rack while the other is running mid-cycle inside the machine.
Q: Does this dishwasher require an external drain pump addition?
A: No. An internal factory-fitted drain pump is built into the machine as standard, allowing wastewater to be actively pumped up and away into elevated commercial drainage lines effortlessly.
Q: How much water does the unit consume per cycle?
A: The Adler DWA2050 is highly efficient, drawing just 1.7 litres of water per wash cycle when supplied at an optimal 2 bar inlet pressure, vastly reducing your hot water utility expenses.
Why Buy from Snowmaster?
When you source your restaurant and bar appliances from Snowmaster, you gain the security of working alongside a trusted trade partner with over 80 years of real-world experience supporting the Australian hospitality landscape.
We don’t simply move boxes. Our comprehensive Adler supplier expertise means our technical support teams understand every element of these elite Italian dishwashers, from plumbing layouts to optimal chemical calibration. We carry an extensive catalogue of genuine spare parts, offer flexible commercial equipment finance options, and secure your venue with reliable, rapid logistics and an expert Australia-wide service network. Partner with Snowmaster to ensure your kitchen wash station never slows down.
Reviews
There are no reviews yet.