Washtech PW3C Widebody Passthrough Warewasher with Heat Recovery
The Washtech PW3C Widebody Passthrough Warewasher with Heat Recovery is a premier sanitation solution built for high-volume Australian commercial kitchens. This heavy-duty industrial pot washer combines a straight-through linear design with eco-friendly heat recycling technology.
By condensing raw steam from the wash cycle to preheat incoming cold water, the PW3C eliminates the need for expensive external extraction canopies in most kitchen layouts. It is the perfect efficiency asset for busy bakeries, food production lines, supermarket delis, and hospital kitchens looking to reduce utility costs, lower workspace humidity, and eliminate manual scrubbing.
The Washtech PW3C is Australia’s most Efficient Pot Washer
Busy hospitality venues handle massive amounts of bulky cookware that standard commercial dishwashers cannot accommodate. The Washtech PW3C passthrough architecture is engineered to streamline this workflow with maximum ergonomic efficiency.
- Linear Passthrough Workflow: Designed to integrate seamlessly with inline bench work. Kitchen staff can slide heavy loads in from one side and pull clean items out the other, accelerating turnover and preventing cross-contamination.
- Condense Steam & Cut Costs: The integrated heat recovery unit recycles waste steam to preheat the cold-water supply. This lowers energy consumption and stops hot, humid steam from escaping into the workspace.
- Massive Widebody Chamber: Built with an expansive internal wash area (W 1050mm x D 640mm x H 650mm) that effortlessly holds large bins, storage crates, oversized mixing bowls, and standard baking trays.
- Low Water Consumption: Despite its massive capacity, the unit operates with a resource-efficient rinse cycle that uses just 4.0 litres of water per cycle.
Key Benefits & Operational Advantages
Smart Production Cycle Options
Optimise your dishwashing throughput using versatile 3, 5, and 7-minute wash programs. Operators can easily adjust cycle speeds via the control interface to match light or heavily baked-on soil levels.
Washtech Hybrid Controls
Built for uncompromising durability in wet commercial environments, the hybrid panel combines water-resistant IP67 stainless steel switches and tried-and-tested electromechanical switchgear with a highly precise electronic timer.
Counterbalanced Hood Operation
The large wash chamber remains easily accessible via an insulated, counter-sprung hood mechanism. This counterbalanced system allows kitchen staff to open and close the machine smoothly, reducing operator fatigue over long shifts.
Low Water Pressure Compatibility
The PW3C features a factory-fitted break tank and rinse booster pump system. This ensures a consistent, high-temperature sanitising rinse every cycle, even in facilities with low or fluctuating inlet water pressure line speeds.
Comprehensive Suite of Standard Features
- Advanced Heat Recovery: Captures and recycles hot steam emissions to optimise energy efficiency on cold water lines.
- No Extraction Canopy Needed: Suitable for installation without an external extraction hood or canopy in many situations.
- High-Powered Recirculation: Driven by an industrial-grade, high-powered dual-pump wash system for complete water coverage.
- Precision Spray Arms: Heavy-duty stainless-steel wash and rinse arms with precision stainless steel jets blast away stubborn grease.
- Fast Clean Double Filtration: Incorporates a dual-stage, heavy-duty stainless steel filtration system, including dual scrap trays and a separate wash pump inlet filter.
- Turnkey Delivery Setup: Supplied ready for an easy installation with water supply hoses, automated detergent pumps, and rinse-aid pumps with custom injector lines.
- Plumbing Compliance: Built with Water Mark-approved backflow prevention to meet strict Australian plumbing codes.
Technical Specifications
Dimensions, Weights & Bench Clearance
- Machine Width: 1305 mm (Overall Width: 1330 mm)
- Machine Depth: 920 mm
- Machine Height: 2015 mm
- Hood Open Height: 2445 mm ± 50 mm
- Usable Wash Chamber Area: W 1050mm x D 640mm x H 650mm
- Required Bench Gap: 1195 mm
- Net Weight: 255 kg
- Packed Weight: 305 kg
- Packed Volume: 3.03 m³
Electrical & Power Requirements
- Power Type: Three-Phase electrical hardwired connection.
- Configuration Option 1: 400V, 50Hz, 30 Amps per phase | Max 19.50 kW
- Configuration Option 2: 400V, 50Hz, 20 Amps per phase | Max 12.00 kW
- An isolating switch must be positioned within 1 metre of the unit and not directly behind the machine cabinet.
Water & Plumbing Connections
- Cold Water Supply (D): <25°C temperature, 3/4″ male connection (hose supplied), 100–350 kPa pressure, 10L/min minimum flow rate.
- Hot Water Supply (A – Fill Only): 65°C temperature, 3/4″ male connection (hose supplied), 100–350 kPa pressure, 10L/min minimum flow rate. (Note: Hot water is recommended for faster initial heating but can be substituted for an additional cold-water line).
- Waste Outlet (B): 1.5″ BSP male connection into a minimum 2.0″ (50mm) waste line.
Standard Inclusions & Included Racks
The warewasher comes packaged with all essential components required for standard implementation, including water hoses, internal chemical pumps, and a premium rack kit:
- 1x 500mm Dish Rack (Part: 600 70028)
- 1x 500mm Cup Rack (Part: 600 70029)
- 1x 435mm Cup Cover (Part: K0452)
- 1x Cutlery Basket (Part: C660508)
Warranty & Compliance
The Washtech PW3C is fully certified to meet rigorous Australian standards. Distributed nationally via Moffat, it features Water Mark approval and comes backed by a comprehensive 5-2-2 Warranty (5 years of coverage on the stainless-steel cabinet, 2 years on the wash pump, and 2 years covering parts and labour) alongside a guaranteed 15-year warranty on parts support.
Cleaning & Maintenance Section
Maintaining the high-pressure performance of your passthrough warewasher requires a few basic cleaning steps:
- Empty the Scrap Trays: Lift out, empty, and rinse the dual stainless steel scrap trays after every heavy service shift to prevent debris from bypassing into the wash pump inlet filter.
- Wipe the Wash Tank: Use a damp cloth to clean the internal wash tank walls daily. Avoid blasting high-pressure external water hoses directly at the control panel housing or hood joints.
- Inspect the Nozzles: Regularly check the independent stainless-steel wash and rinse arm jets for mineral or scale buildup, clearing any obstructions to maintain full water velocity.
Frequently Asked Questions (FAQs)
Q: How does the heat recovery unit on the Washtech PW3C save energy?A: It captures the hot waste steam generated during the wash cycle and transfers that thermal energy to preheat incoming cold water. This reduces the electricity required to heat water to sanitising temperatures.
Q: Do I need an extraction canopy installed above this machine?A: In most installation scenarios, no external canopy or extraction hood is required because the machine condenses and recycles steam internally, provided your kitchen has adequate general ventilation.
Q: What is the main workflow benefit of a passthrough model like the PW3C?A: It integrates into linear, straight inline bench work. This allows kitchen staff to load soiled wares on one side and slide clean items out the other, creating an efficient wash line that minimises physical handling.
Q: Can the PW3C run on low building water pressure?A: Yes, the machine is factory-fitted with an internal break tank and rinse booster pump, ensuring it delivers a powerful sanitising rinse completely independent of low building water pressure lines.
Q: What type of electrical connection does this widebody unit require?A: The PW3C requires a dedicated three-phase electrical hardwired connection, configurable to either 20 Amps or 30 Amps per phase during installation.
Why Buy from Snowmaster?
With over 80 years of industry experience, Snowmaster is a premier trusted supplier of the Washtech range by Moffat across Australia. We recognize the intense daily demands of fast-paced catering environments, commercial bakeries, and industrial food preparation zones.
Our long-standing supplier expertise means your business gets unmatched post-purchase technical support, rapid interstate freight delivery, and competitive commercial pricing to ensure your cleanup operations run with zero downtime.
Reviews
There are no reviews yet.