Hallde RG-400I-3PH Pneumatic Feed Vegetable Preparation Machine

$25,802.00

RENT - TRY - BUY
$46.78 + GST / day
Get approval in under 5 minutes
Apply for finance now!
 
BUY - NOW - PAY - LATER
First Payment  $3867.72  +   GST
19 Payments   $1290.1  +   GST

$25,802.00

SKU: RG-400i-3PH-Pneumatic Category:
Questions? Call Customer Service

The Hallde RG-400i-3PH Pneumatic Feed vegetable preparation machine represents Hallde’s most substantial and efficient Vegetable Preparation Machine, designed for processing very large volumes. Its extensive cutting tool repertoire includes slicing, dicing, shredding, julienne cutting, crimping slicing, and french fry cutting across a wide spectrum of dimensions. Furthermore, it offers a comprehensive selection of feed attachments and accessories, ensuring its adaptability to address a diverse range of culinary requirements.

Product features

  • Manufactured in Sweeden.
  • Warranty; 3 Years when registered.
  • Blades Not Included.
  • The RG-400i-3PH is Hallde’s largest and most effective Vegetable Preparation Machine that prepares very large volumes.
  • Processes up to 3,000 portions/day, 40 kg/minute or up to 2.4 tons/hour.
  • Slices, dices, shreds, cut julienne, crimping slicers and cuts french fries in a wide range of dimensions.
  • There is a broad range of feed attachments and accessories, enabling adaptation to many different needs.
  • Price includes Machine Base (HA37062)
  • Pneumatic push feeder Attachments (comprising HA37063 Type A Feed Cylinder, HA37106 Pneumatic Push Feeder)
  • Requires compressed air
  • Enables continuous filling by the bucket for preparation of primarily round products.
  • The capacity becomes very high because the machine runs constantly and is thus extremely time effective.
  •  RG-400i-3PH with Feed Hopper can be strategically placed in a continuous production flow.
  • With the pneumatic feeder, the product is pushed down automatically with just one push of a button.
  • The workload and time spent are minimised and the feeder is therefore particularly useful when preparing larger quantities and when large and hard products are to be cut.
  • The Pneumatic Feeder has three speeds that can be varied depending on what is going to be prepared.
  • Full moon feed head.
  • Stainless steel housing & feed head.
  • Large 215 mm diameter cutting tools.
  • Over 44 different discs are available to suit all requirements.
  • Three-phase only – 1500W, other voltage/cycles on application.
  • Cutting tools and trolleys not included in the machine price.
  • 4 tube feeder allows slicing of long vegetables eg carrots, cut transversely.

Shipping Information

Estimated delivery times “Within” the Sydney CBD & Metro area 2–5 Business days after full payment has been cleared.

All Sydney CBD & Metro deliveries are into the premises where possible, clear access through the doorways must be provided.

Delivery will not include dismantling the equipment or dismantling the premises to fit the equipment through doorways.

Carrying equipment upstairs, unpacking, taking the rubbish away & installation “is not” included in the standard delivery fee.

“Extra services” can be quoted prior to delivery, carrying upstairs, unpacking, taking the rubbish away, and removing old equipment.

Delivery days are estimates only & subject to change’s outside of our control, exact delivery times can not be given prior.

The drivers will call you the day before or the morning of the delivery day & give you an estimated delivery time.

Deliveries are usually carried out between Monday–Friday 8.00 am–3.00 pm, outside of these hours can be arranged prior.

 

Estimated delivery times “Outside” the Sydney CBD & Metro area 5–10 Business days after full payment has been cleared.

All Rural or Interstate deliveries are Kerb Side or Loading dock only, ground floor, no stairs, no unpacking & no installation.

Extra services such as unpacking, taking the rubbish away, and removing old equipment can not be provided.

Delivery days are estimates only & subject to change’s outside of our control, delivery times on the day are not given.

Deliveries are usually carried out between Monday–Friday 8.00 am–4.00 pm, outside of these hours can be quoted prior.

Rural & Interstate deliveries are carried out by 3rd party contractors, please work with the carriers to have a smooth delivery.

 

To confirm a freight charge prior to placing your order just phone us on 02 9799 9911 or Email sales@snowmaster.com.au

All freight charges are calculated on the information provided by you the customer.

Extras service’s during the delivery will not be provided on the day unless a prior arrangement was made.

Customer pick up’s from our warehouses can be made with prior arrangements.

Reviews

There are no reviews yet.

Be the first to review “Hallde RG-400I-3PH Pneumatic Feed Vegetable Preparation Machine”

Your email address will not be published. Required fields are marked *